Wavin - Ceiling and Wall Radiant Systems

PE-RT pipe for WW-10 systems

Code

90 220

Specifications

Pipe

thk.

200

1.3

LAYERS

PE-RT type II 5 layer pipe, especially made for radiant systems (application class

4/ 10 bar, according to ISO 10508). The central layer is an EVOH oxygen barrier.

Use

Panel to be made on site to form radiant wall or ceiling panels for concealed

mounting applications.

The panel is designed to be fixed to the rough structure by means of metal anchors

or hot glue. Minimum finished render thickness 25 mm.

WW-10 panels made on site are most frequently used to create ceiling systems,

because it makes it possible to achieve percentage coverage of up to 100% of the

ceiling area available.

They are also used for wall systems, where the spaces available do not allow pre-

fabricated panels to be used.

There are no rules for the render to be used, other than that its must not be insulat-

ing render. We recommend adding a render support mesh between a first 15 mm

layer covering the panel and a second 10 mm layer, applied to the first while it is

still fresh, for finishing.

The hydraulic connections between the panels must be made using the reverse

return system (Tichelmann), which ensures limited pressure loss, and the same

supply temperature.

Bracket for WW-10 systems

Code

Pipe

90 302

Specifications

Bracket to support pipe bends, to be used with the relevant clip rail.

Use

Support element to be used along with a clip rail in order to avoid the pipe moving

in a direction perpendicular to the surface, after laying.

Ceiling and wall radiant system – Product guide

Tel. +39 0425 75 88 11